Plug and Play ADS-B Transceiver TR-1W for UAV and Drones

Introduction
OVERVIEW TR1W belongs to the class of the smallest ADSB transceivers on market and has been developed for civil and commercial Unmanned Aircraft Systems. The device operates on 1090 MHz and allows to receive and transmit ADSB data with 1 Watt output power. The transceiver does not require external devices to operate. It is equipped with a high quality multiGNSS receiver and a pressure sensor. The aluminium housing and ESD protection guarantee high resistance of the device to work in difficult conditions. TR1W opens the way to the implementation of the Detect and Avoid algorithms, supporting the integration of UAS into the airspace. BASIC FEATURES • Realtime aircraft tracking on 1090 MHz • Patented FPGAInTheLoopTM technology with the capability of receiving thousands of frames per second • Integrated GNSS source and pressure sensor • 1 Watt RF output power • Implemented MAVLink and AEROTM protocol • Lowpower consumption and low weight design • Simple plug&play integration • Programming via AT commands • Designed to meet MOPS DO260B (except the output power) • Dimension: 45.5 x 28.0 x 10.0 mm

Introduction

OVERVIEW
TR1W belongs to the class of the smallest ADSB transceivers on market and has been developed for civil and commercial Unmanned Aircraft Systems. The device operates on 1090 MHz and allows to receive and transmit ADSB data with 1 Watt output power. The transceiver does not require external devices to operate. It is equipped with a high quality multiGNSS receiver and a pressure sensor. The aluminium housing and ESD protection guarantee high resistance of the device to work in difficult conditions. TR1W opens the way to the implementation of the Detect and Avoid algorithms, supporting the integration of UAS into the airspace.

Plug and Play ADS-B Transceiver TR-1W for UAV and Drones

BASIC FEATURES
• Realtime aircraft tracking on 1090 MHz
• Patented FPGAInTheLoopTM technology with the capability of receiving thousands of frames per second
• Integrated GNSS source and pressure sensor
• 1 Watt RF output power
• Implemented MAVLink and AEROTM protocol
• Lowpower consumption and low weight design
• Simple plug&play integration
• Programming via AT commands
• Designed to meet MOPS DO260B (except the output power)
• Dimension: 45.5 x 28.0 x 10.0 mm

TECHNICAL PARAMETERS

Parameter	Value
Frequency	1090 MHz
Input voltage	5 V
Current consumption	130 mA
Sensitivity	80 dBm
RF Output power	+30 dBm
ESD protection	All lines
MAVLink (baud)	115200 bps
AERO (baud)	115200 bps (AT commands)
Main connector	PXMBNI05RPM04APC
Antenna connector	2 x MCX
Dimension	45.5 x 28.0 x 10.0 mm
Weight (without cables and antennas)	30 grams

ELECTRICAL SPECIFICATION

Plug and Play ADS-B Transceiver TR-1W for UAV and Drones

PIN DEFINITION

Pin	Wire colour	Name	Function
1	Red	+5 V	Power supply (5 V/ 130 mA)
2	Green	TX	Data from device to host
3	White	RX	Data from host to device
4	Black	GND	Ground

LED INDICATORS

LED	Function
Green	Power supply indicator
White	Frame detection / receive indicator
Red	ADSB OUT indicator 1. OFF – Disabled 2. Blink – Wait for FIX 3. ON – Active

MECHANICAL SPECIFICATION

All dimensions in mm (tolerances ±0.1 mm)

Plug and Play ADS-B Transceiver TR-1W for UAV and Drones

Connector	Type	Example
Main	Installed on board	BULGIN, PXMBNI05RPM04APC
Main	Mating connector	BULGIN, PXPPVC05FBF04ACL010PVC
Antenna	Installed on board	MCX, 73415 1061
Antenna	Mating connector	MOLEX, 733660010